Tanning bed bulbs are used in every tan bed or suntan lamp on the market. When you are purchasing a new or especially a used tanning bed, take a good look at the bulbs. Make sure that they are proper tanning bulbs and meet the FDA guidelines for health and safety. You should also consider how easy it is to get at the bulbs. Make sure that the bulbs are not difficult to change when needed. It is quite important and a lot cheaper if you can perform such simple maintenance yourself, if you buy a home tanning bed.
There are two completely different types of lamps used in conventional and high pressure beds. Ensure you get the right sun bed bulbs for your sun bed, because you cannot use any bulbs you like. If you are purchasing replacement bulbs on the Internet, check the make and model of your existing lamps carefully. Ensure that the bulbs you are buying are suitable for your bed.
High Pressure Tanning Bulbs: high pressure beds have quartz-tube lamps in a multitude of sizes. The gases used in these bulbs are pressurized to slightly higher than atmospheric pressure. The lamps in these beds are located in the hood of the bed, so that you tan only from above. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The flat bed of these tanners is a great deal more comfortable than a regular tanning bed.
One of the biggest advantage of these HP bulbs is the amount of time you have to spend on the tanning bed. Because you tan more quickly, you need to spend less time in the tanning salon, which means it works out cheaper. You can get the depth of tan you want in about three weeks of three to five sessions a week. However, with a low pressure bed, it would take you at least a month to acquire the same depth of colour. Maintaining your tan is much easier too. You only need two or three sessions each month to maintain the colour, as opposed to four times that many visits to a conventional salon bed. Many of these lamps produce UVA rays only, not UVB rays which cause sunburn.
Conventional Tanning Bed Bulbs: Conventional, or low pressure sunbeds use long tube lamps that look like regular fluorescent tubes. The lamps are situated above and below the tanning bed, which means that all the body areas are browned at the together, without having to change positions during the tanning session.
Low pressure beds use UVA and UVB rays in varying levels. Some use both rays and others emit mostly UVA with some UVB rays. UVA rays are the cause of the (premature) ageing effects on the skin and UVB rays are the burning rays that cause skin burn when you are outside in the sun. It is very important to determine which sort of rays your tan bed’s bulbs emit. You must ensure you replace your existing bulbs with lamps of the same specifications after about 1,000 hours of use.
Something else to think about when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions suit different sorts of beds. The owner of your tanning salon will be able to help you select a lotion that will be best for the bed you are using and your skin type. Regardless of the bed you use, you ought to certainly always use a lotion or a cream, because they will nourish your skin and help you get a Hollywood tan more quickly.
Do you want to discover more about tanning bed bulbs? If you do, just visit our web site on tanning bed bulbs Get a totally unique version of this article from our article submission service